You want your construction to look as perfect from the outside as it does on the inside, and facade/landscape lighting is a great way to achieve perfection. Well-designed outdoor lighting will highlight the beauty of your construction and facade/landscape, increasing your curb appeal and your property value. But as perfect as your exterior lighting looks, it can have problems from time to time. So what do you do when your perfect outdoor lighting stops being perfect?
1 . Burnt Out LED Bulbs
Burnt out LED bulbs are the number one most common problem we see with facade/landscape lighting systems. You may be thinking, that’s not a big issue—just change the LED bulbs—but it can actually be a big issue. The LED bulbs used for outdoor lighting systems are designed to last a long time, so if they’re burning out sooner than expected, it could be an indicator of deeper issues, like faulty wiring or wrong installation.
Make sure you have changed the burnt out LED bulbs and inspect your system for deeper issues.
2. Connection Issues
This is the most common problem we see with facade/landscape lighting systems here in Vietnam, it is a problem connections. 99% of the time, a connection malfunctions because water has gotten into it. This can be due to improper installation (like using electrical tape to cover a connection rather than using an actual connector) or because the wrong type of connector was used. Improper connections not only put your lighting at risk of shorting out, it also poses a major shock risk that’s dangerous to you. Your facade/landscape lighting is outdoors, so your connectors should be waterproof;
Make sure you have the right connections to prevent problems.
Find out more information about how to connect
here.
3. Corroded/Rust Wires & Sockets
We rarely get calls for wire and socket corrosion or rust; usually, we discover corroded/rust wires and sockets while already there to address a problem with burnt out LED bulbs or faulty connections. This is because corrosion is caused by exposure to water, and water rarely gets into your sockets and wires without there being a pre-existing problem with your outdoor lighting. For example, if a LED bulb has burned out, it won’t produce the heat needed to burn away condensation, and the wetness of the condensate corrodes the socket.
Avoid wire and socket corrosion by having burnt out bulbs and faulty connections fixed as soon as you notice a problem.
4. Quality of LEDs product
Always has the large difference between high & low quality LEDs, it affects to LEDs product quality. Final user will be
Customer is not always getting what they expect from cheap products. So what to consider when choosing between high and low quality LEDs?
To more information of LEDs quality, pls see
here